Patch Party Leopard

Iron-on Patch Party Leopard
Sizes: approx. 3.5 cm x 6.0 cm 

The patch only needs to be ironed on! Optionally, it can be sewn on or fixed with textile glue (this is suitable, for example, for fabrics that are not ironable).

You can find the ironing instructions below and on the back of the packaging of your ordered patch

Care instructions: Wash inside out at 30 degrees after 48 hours at the earliest, not suitable for tumble drying

Ironing instructions:

The patch can be ironed onto cotton (e.g. cotton, jersey, sweatshirt) and denim fabrics (for garments, at least 3 ironing dots, see care instructions). For other types of fabric, check for heat sensitivity in an inconspicuous area. If the fabric is unsuitable for ironing on, you can attach the patch by sewing it on or gluing it with textile glue.

Note: For the best hold, wash your garment or fabric piece before attaching the patch!

1. Set your iron to "cotton" mode (approx. 140-150 degrees)
2. Place your patch in the desired position and cover it with a thin, slightly damp (cotton) cloth
3. Press the iron firmly onto the patch for approx. 30 seconds (without steam)
4. Turn the garment or fabric piece inside out and repeat the process
5. Let cool flat for approx. 5 minutes